International industrial startup

Make profit from the Russian breakthrough technology

Transparency

Weekly report for the investors

Protection

Investment agreement

Profitability

Venture reward

What makes Duyunov's technology unique

Hub motor based on Duyunov's technology is the first in the world induction electric motor with "Slavyanka"-type winding that has a unique combination of capacity and power consumption.

The new technology is based on the developed by us innovative combined winding technology for motors (star and delta combined in parallel).

Thanks to the combined winding, the hub motor performance is significantly improved and energy efficiency is increased.

UNIQUENESS OF OUR TECHNOLOGY
  • Increasing the torque up to 50 %
  • Increasing the trip distance up to 25%
  • Increasing the maximum speed by 10%
  • Enhancing the acceleration performance by 30%

PATENTS

Comparing hub motor types

Induction based on Duyunov's technology

No decelerating force with the power supply switched off:

Opportunity to coast;
Easy to cycle.

With permanent magnets - BLDC

High braking torque with the power supply switched off:

No opportunity to coast;
Difficult to cycle.

Induction based on Duyunov's technology

Maintaining torque at any revolutions.

Controllable overload capacity, depends on currents.

Maintaining coercive force during the whole service life regardless of operation.

With permanent magnets - BLDC

Significant torque drop with increased revolutions.

Loss of coercive force in time. The loss rate depends on the operational conditions:

motor power will reduce over time.

Induction based on Duyunov's technology

Almost not sensitive to physical action.

Resistant to ferromagnetic powder.

Resistant to moisture attack.

Half of the motor is nonmovable, good cooling system.

Possibility to use cable of any diameter.

With permanent magnets - BLDC

Vulnerable to physical action. Magnets are a fragile material. On impact they get demagnetized and can crumble.

Sensitive to ferromagnetic powder:

often get damaged in operation;
complicated repair.

Vulnerable to moisture attack:

rust, can unglue.

Need in airtightness .

The power supply cable is limited in diameter.

Induction based on Duyunov's technology

Low cost.

Availability of materials and suppliers of Russian raw materials, independence from other countries.

Easy to produce.

With permanent magnets - BLDC

Higher price.

Small number of raw materials suppliers. Everything is patented and monopolized, dependence on China.

Deficit of raw materials on the market, the raw materials are difficult to produce and process.

The project history and plans

The development was funded by the developer
The start of project crowdfunding

Year 1995

The research and development of the technology started 20 years ago

Year 2011

The beginning of wide practical application of combined winding motors and obtaining the first patent.

Year 2012

Award for the best innovative project in XI Russian Innovations Competition.

Our electric machines successfully undergo tests in various systems and areas outperforming their rivals.

Year 2013

Donetsk: testing electric locomotive "Era".

After modifying the electric motor using Duyunov's technology, "Era" handles 11 cars instead of 5.

Kiev: a trolley bus with a modified motor was tested.

Year 2014

Tyumen: the modified wind power synchronous generator produced the same amount of electricity at the wind speed of 2 m/sec as the original motor at 5 m/sec.

Year 2015

Lutsk and Kiev: successful application of the technology to the electric bus motor.

Germany — Monaco: reengineered full-drive electric car Renault Kangoo demonstrates record performance excelling all same-class electric cars.

February: the start of developing the first induction hub motor in the world

June: the second prototype of the hub motor was produced. Improved motor parameters and coordinating controller operation with the support of Curtis.

November: Producing the 3rd prototype of the hub motor. Participation in the exhibition in Moscow in the Central House of Artists with the support of the Global Wave.

Testing the hub motor in Germany with the support of Elmoto.

2017

Start of crowdfunding
Mass production of motors based on Duyunov's technology has been launched by the project partners
Renting and repairing the premises for the production sites
Purchasing the first equipment for the project needs
Preparing the package of documents for entering the SEZ "Technopolis "Moscow" ("Alabushevo" site)
Launching the laboratory and testing area

Year 2018

Test bench equipment for testing electric motors has been mounted
The testing area for producing the first batches of motors was equipped
The agreement with a major investor was signed about additional funding of the project if needed
Mass production of motors based on Duyunov's technology has been launched by the project partners
New patents have been obtained and the applications for more patents are filed
The agreement with the Chinese authorities of Weihai province was signed about the protection of intellectual property of Duyunov
The letter of intent was signed with the companies from Russia, China and Europe that are ready to order customized motors made using Duyunov's technology to meet their needs
The application for entering the SEZ "Technopolis "Moscow" ("Alabushevo" site) was accepted

2019-2021

Obtaining patents
Entering the SEZ Technopolis "Moscow" ("Alabushevo" site)
Construction of the design engineering department
Producing the pilot batches of electric motors based on Duyunov's technology
Signing agreements with the customers
Start of commercial activity, completing the first orders
Mass production of motors based on Duyunov's technology has been launched by the project partners

Become a co-owner of the international
manufacturing business

What does the investor get?

A share in the business

Each investor becomes the co-owner of the future enterprise

Dividends

Lifelong dividends at all development stages

Investment agreement

The rights and investments of each participant are legally secured and reinforced by the agreement

examples of venture startups

google shares In 1998 David Cheriton believed in two young men: Sergey Brin (our compatriot) and Larry Page and invested $100,000 into their "Google" startup. Now David's share is $1,000,000,000. 10,000 times in 16 years

apple shares In 1976 Ron Wayne, having doubts about the success of his company, sold 10% of his shares for $800 2 weeks after founding the company. Today these shares cost over $50,000,000,000 and the company's name "Apple" is known around the world. 68,749 times in 38 years

alibaba shares Everybody knows that AliExpress is a world famous trading platform and the main rival of Ebay. And it is also the offspring of Alibaba Group. In 2013 the Company's turnout was $7.5 billion, capitalization - $266 billion. And in 2014 the company's shares were launched for IPO on New York Stock Exchange which attracted $21,800,000,000 (instead of the anticipated $1 billion). As of January 26, 2018, the Company's capitalization amounted to $500,000,000,000. 3,849,999 times in 18 years

Our team

Dmitriy Duyunov

Russian development engineer, inventor. The author of the combined winding technology "Slavyanka" for electric motors

Evgeniy Duyunov

Development engineer
of the technology

Sergey Semenov

Head of the project
funding department

Pavel Filippov

Head of advertising and PR department.

how can you become the project investor?

1. Register

2. Sign the agreement

3. Invest